Itel A25 L5002 Stock ROM And Tool [Official ]
Are you searching official stock Rom for Itel A25 L5002 mobile? If yes then you are on correct place to download latest stock ROM for Itel A25 L5002 SPD mobile. Here in this post we are adding latest android pie 9.0 flash file for Itel A25 L5002 mobile with SPD flash tool and drivers.
Just download Itel A25 L5002 flash file, drivers, tools and follow the firmware installation process. Stock Rom installation is very easy for Itel A25 L5002 mobile it should be into proper way. Otherwise, it may brick your device permanently.
In case you are new and never tried to flash any mobile then don’t worry about that. Itel A25 L5002 firmware installation is very easy for any newbie user and advance user.
It’s must to know that Itel A25 L5002 is a SPD mobile and it’s firmware contain .pac file in firmware file. That means, we have to use SPD flash tool which is able to flash .pac file firmware easily. For this purpose, we can choose “researchDownload tool” or “factoryDownload tool” or “upgradeDownlod tool” etc. These entire SPD flash tools can flash .pac file firmware including Itel A25 L5002 .pac file.
Best thing about these SPD flash tools is that all the SPD flash tools are free without box. So download correct firmware for your device and flash it using free SPD tool. Simple and easy to understand user interface allows user to flash Itel A25 L5002 android pie stock ROM without dead risk.
Itel A25 L5002 Stock ROM, Drivers And Tool Download
|Official Stock ROM For Itel A25 L5002 Mobile|
|Drivers For Itel A25 L5002|
|Itel A25 L5002 Flash Tool|
Quick Steps To Flash Itel A25 L5002 Android 9.0 Firmware
- Download any one “SPD Flash Tool” from above download section and extract it on pc.
- Install “Itel A25 L5002 USb Drivers” on windows pc.
- Enter into Extracted flash tool folder and run application as administrator.
- Once the tool launched, click on “Gear Icon” to load “L5002-F3210-9.0-OP-V030-20191113.pac” file from extracted firmware folder. Make sure you are loading correct file for flashing.
- Again come to the tool and click on “Play” button for this time. This step is must to start firmware installation process.
- Now come to the device and connect it with via USB cable. Don’t forget to press boot key. Otherwise, tool will not detect the device.
- If the device is properly connected with pc then tool will detect the device and firmware installation process will start automatically.
Note: Firmware installation will take approx 10-15 minutes to flash complete stock ROM. So sit back and wait for successful firmware flashing.
- After successful firmware installation, you will see green “Success” message on tool’s log window.
- Now you are free to unplug USB device from pc. Just reboot the device and setup the device again as a new device. This time device will boot with newly installed official stock ROM.
Invalid IMEI On Itel A25 L5002 After Flashing
If you are flashing the correct stock ROM with proper procedure then no issue. But some time your device may show no network on Itel A25 L5002 mobile after stock ROM installation. So if you are also getting no network on Itel A25 L5002 after flashing then check IMEI number status of the device. In case, it’s showing null IMEI or invalid IMEI then write IMEI number on Itel A25 L5002 using SPD writeIMEI tool.
SPD WriteIMEI tool To Repair IMEI Of Itel A25 L5002
Itel A25 L5002 FRP Unlock Without Box
As we all know we can remove pattern lock or PIN lock on Itel A25 L5002 mobile by factory hard reset. But problem is that if you were using any Google account on the same device then it will ask you to verify Google account verification after factory reset.
So if your device is locked on FRP then you can follow exactly same above firmware flashing method to unlock FRP on Itel A25 L5002 mobile. In short, firmware installation process and frp bypass method is same for Itel A25 L5002 android pie.
This is all about Itel A25 L5002 Stock ROM and tool. just download official stock ROm with flash tool and follow the steps properly.